The Polymerization Of Self-Curing Resin Takes Faster In______
The Polymerization Of Self-Curing Resin Takes Faster In______
Under Pressure | |
In Vaccum | |
Cold Water | |
Hot Water |
پاک اسٹڈی لائبریری اپنی خدمات کو بہتر کرنے کے لئے نئے سوفٹ وئیر انسٹال کررہی ہے ۔ اس لئے آئندہ کچھ دن آپ کو کچھ صفحات تک رسائی میں مشکلات کا سامنا ہوسکتا ہے ۔ جس کے لئے ہم معذرت خواہ ہیں۔
Pak Study Library is installing new software to improve its services. herefore, in the next few days, you may face difficulties in accessing some pages. sorry for the inconvenience.
The Polymerization Of Self-Curing Resin Takes Faster In______
Under Pressure | |
In Vaccum | |
Cold Water | |
Hot Water |
The Point At Which A Stress Of A Material Exhibits A Specific Limited Deviation P Is Called______
Proportional Limit | |
Yield Strength | |
Tensile Strength | |
Ultimate Strength |
The Plasticizers Used In Polyether Impression Material Is______
Di-Vinyl Poly (Dimethyl Siloxane) | |
Colloidal Silica | |
Glycol Ether | |
Polyether Polymer |
The Percentage Of Copper In High Copper Alloy Is______
0-6% | |
20-30% | |
13-30% | |
10-12% |
The Pattern For The Metallic Framework Of A Removable Partial Denture Is Fabricated From______
Modelling Wax | |
Inlay Wax Type-Ii | |
Casting Wax | |
Boxing Wax |
The Particle Size In Microfilled Composites Is______
0.05 To 0.04mm | |
0.3 To 0.4mm | |
0.5 To 1.0 Microns | |
0.01 To 0.1 Microns |
The Opacity In Ceramics Is Achieved By Adding______
Boric Oxide | |
Silica | |
Copper Oxide | |
Titanium Oxide |
The % Of Free Monomer In A Heat – Cured Acrylic Resin Is______
3% To 5% | |
0.6% To 0.8% | |
8% To 10% | |
0.2% To 0.5% |
The Most Toxic Form Of Mercury Is______
Methyl And Ethyl Mercury | |
Mercury Sulphide | |
Mercury Vapour | |
Inorganic Mercury Forms |
The Most Mucostatic Impression Material Is______
Free Flowing Wax | |
Reversible Hydrocolloids | |
Thin Mix Of Plaster Of Paris | |
Zinc Oxide Eugenol Impression Paste |
The Most Important Disadvantage Of Acrylic Denture Base Is______
Water Absorption | |
Porosity | |
Shrinkage | |
Tooth Breakage |
The Most Commonly Used Titanium Alloy For Dental And Medical Purposes Is______
Ti 5al 5v | |
Ti 6al 4v | |
Ti 6al 6v | |
Ti 5al 4v |
The Most Commonly Used, Most Biocompatible And Adhesive Cement Is______
Glass Ionomer | |
Zinc Oxide Eugenol | |
Calcium Hydroxide | |
Zinc Phosphate |
The Most Commonly Used Accelerator In Gypsum Product Is______
Potassium Sulfate | |
Aluminium Sulfate | |
Potassium Fluoride | |
Sodium Fluoride |
The Most Common Coupling Agents Are Organic Silicon Compound Called______
Parabane | |
Silane | |
Ligane | |
Chelane |
The Modulus Of Elasticity Is Defined As______
None Of The Above | |
The Stress/Strain Ratio Within The Proportional Limit | |
The Strain At The Proportional Limit | |
The Stress At The Proportional Limit |
The Melting Point Of Titanium Is ______ Degree Celsius?
1886 | |
1560 | |
1056 | |
1668 |
The Melting Point Of Silver Is______
1063° Centigrade | |
960° Centigrade | |
850° Centrigrade | |
1123° Centrigrade |
The Maximum Shrinkage During Firing Proces In Ceramic Occurs In______
Medium Bisque Stage | |
Fusion Stage | |
Low Bisque Stage | |
High Bisque Stage |
The Maximum Carbon Content Of Steel Used In Dentistry Is______
2% | |
1.70% | |
4% | |
19% |
The Material Used In Its Pure Form In Dentistry Is______
Gold | |
Composite | |
Amalgam | |
Silver |
The Malleting Force Is Directed______
Perpendicular To The Walls | |
None Of The Above | |
Parallel To Long Axis Of Crown | |
45° To The Wall |
The Major Component Of Zinc Phosphate Cement Is______
Phosphoric Acid | |
Zinc Oxide | |
None Of The Above | |
Zinc |
The Main Purpose Of Adding Metallic Oxides In Ceramic Is______
None Of The Above | |
Colour Matching | |
Transparency | |
Opacity |
The Main Ingredient Of Inlay Wax Is______
Candellila Wax | |
Paraffin Wax | |
Carnauba Wax | |
Gum Dammar |