About Zinc Oxide Eugenol All Are True Except______
About Zinc Oxide Eugenol All Are True Except______
Dehydrated Zno Reacts With Dehydrated Eugenol | |
Zno Is Converted To Zn(Oh)2 | |
Water Is The Byproduct Of Reaction | |
Reaction Is Autocatalytic |
پاک اسٹڈی لائبریری اپنی خدمات کو بہتر کرنے کے لئے نئے سوفٹ وئیر انسٹال کررہی ہے ۔ اس لئے آئندہ کچھ دن آپ کو کچھ صفحات تک رسائی میں مشکلات کا سامنا ہوسکتا ہے ۔ جس کے لئے ہم معذرت خواہ ہیں۔
Pak Study Library is installing new software to improve its services. herefore, in the next few days, you may face difficulties in accessing some pages. sorry for the inconvenience.
About Zinc Oxide Eugenol All Are True Except______
Dehydrated Zno Reacts With Dehydrated Eugenol | |
Zno Is Converted To Zn(Oh)2 | |
Water Is The Byproduct Of Reaction | |
Reaction Is Autocatalytic |
About Polymerization Shrinkage Of Composite All Are True, Except______
Polymerization Shrinkage Is High If Within The Enamel Margins | |
Polymerization Shrinkage Is Greater If Bonded Surface Area Is Lesser Than Unbounded Surface Area | |
Acid Etching And Priming Will Decrease Polymerization Shrinkage | |
Microleakage Can Occur Because Of Polymerization Shrinkage |
Ability Of An Orthodontic Wire To Spring Back To Its Original Shape Is Evaluated By______
Tensile Strength | |
Brittleness | |
Toughness | |
Resilience |
A Thinner Mix Of A Gypsum Bonded Investment Will______
Produce A Smoother Casting | |
Increase Setting Expansion | |
Decrease Setting Expansion | |
Increase Thermal Expansion |
A Technique Of Combining Reversible And Irreversible Hydrocolloid That Could Bond To Irreversible Hydrocolloid Is Known As______
Laminate Technique | |
Tempering Technique | |
Injecting Technique | |
Immersion Technique |
A Rough / Chalky Surface Of The Cast Is Due To______
All Of The Above | |
Air Incorporation In The Mix | |
Not Waiting For 20 Min Before Pouring | |
High Speed Accelerator |
A Restorative Material Which Has A High Proportional Limit, Compared With One With A Lower Proportional Limit Would Have______
A Higher Modulus Of Elasticity | |
More Resistance To Permanent Deformation | |
Greater Ductility | |
Greater Toughness |
A Patient Who Has Had A Recent Amalgam Filling In The Upper Teeth Has A Gold Filling In The Lower Teeth, The Patient Complains Of Pain.
Pulp Exposure | |
Improper Amalgam Filling | |
None Of The Above | |
Galvanism |
A Material Which Partially Transmits Light & Partially Scatters It______
Reflector | |
Translucent | |
Transparent | |
Opaque |
A Material Which Is A Mixture Of Two Different Materials And Its Properties Are______
Composite | |
Combined | |
Complex Material | |
Compound |
A Material Behaves In Certain Ways Above And Below The Proportional Limit On A Stress Strin Curve, Which Of The Following Is Correct______
Above The Proportional Limit A Material Function In A Plastic Manner, While Below The Proportional Limit It Behaves As An Elastic | |
Above The Proportional Limit A Material Functions In An Elastic Manner, While Below The Proportional Limit It Behaves As An Plastic | |
Neither A Or B | |
Either A Or B |
A Laminate Impression Technique Utilizes______
Syringe Agar And Chilled Tray Alginate | |
Syringe Agar And Impression Compound | |
Syringe Agar And Tray Agar | |
Chilled Alginate And Impression Compound |
A Highly Polished Surface On A Metallic Dental Restoration Aids Considerably In The Prevention Of The______
Warpage | |
Thermal Conductivity | |
Tarnish And Corrosion | |
Dimensional Change |
A Good Adhesive Should Possess All Of The Following Except______
High Contact Angle | |
High Flow | |
Low Contact Angle | |
High Adherend Wetting |
A Fluid Having Constant Viscosity That Does Not Depend Upon The Strain Rate Is Said To Be______
Plastic | |
Pseudoplastic | |
Newtonian | |
Viscoelastic |
A Crystal In Metal Substructure Is______
Stroma | |
Grain | |
Nucleus | |
None Of The Above |
A Common Electrolyte Used For Plating Copper Indirect Dies Is______
Ionic Copper | |
Copper Cynide | |
Silver Cyanide | |
Acidic Copper Sulfate |
4th State Of Matter Is______
Colloid | |
Gas | |
Liquid | |
Solid |
18-B Stainless Steel Orthodontic Wire Has______
18% Carbon 8% Iron | |
18% Nickel 8% Chrominum | |
18% Chromium 8% Cobalt | |
18% Chromium 8% Nickel |