To Prevent Porosity In Self-Cure Acrylic Resin, Curing Should Be Carried In______
To Prevent Porosity In Self-Cure Acrylic Resin, Curing Should Be Carried In______
Under Vacuum Pressure | |
Cold Water | |
Hot Water | |
Under Tap Water |
پاک اسٹڈی لائبریری اپنی خدمات کو بہتر کرنے کے لئے نئے سوفٹ وئیر انسٹال کررہی ہے ۔ اس لئے آئندہ کچھ دن آپ کو کچھ صفحات تک رسائی میں مشکلات کا سامنا ہوسکتا ہے ۔ جس کے لئے ہم معذرت خواہ ہیں۔
Pak Study Library is installing new software to improve its services. herefore, in the next few days, you may face difficulties in accessing some pages. sorry for the inconvenience.
To Prevent Porosity In Self-Cure Acrylic Resin, Curing Should Be Carried In______
Under Vacuum Pressure | |
Cold Water | |
Hot Water | |
Under Tap Water |
To Prevent Porosity In Dental Porcelain It Should Be Backed______
In Vacuum | |
Under Pressure | |
Boric Oxide | |
For Long Period |
To Make The Vinyl Polysiloxane Hydrophilic The Following Is Added______
Surfactant | |
Water | |
Plasticizer | |
Mineral Oil |
To Cure A Heat Cure Resin, A Proper Heating Cycle Is Necessary______
All Of The Above | |
To Prevent Warpage | |
To Prevent The Porosity | |
To Prevent Volume Expansion |
Titanium Casting Is Done______
Under Air Pressure In Nitrogen Atmosphere | |
In Specially Fabricated Aluminium Vanadium | |
Using Cad-Cam Technique | |
Under Vacuum In Argon Atmosphere |
Thickness Of Luting Cement Is______
20-40Μ | |
60-80Μ | |
10-20Μ | |
1-2Μ |
Thermal Conductivity Of Which Material Is Close To Dentin______
Amalgam | |
Cavity Varnish | |
Silicate | |
Composite Resin |
The Zinc Oxide-Eugenol Impression Pastes Harden By______
Chemical Reaction | |
Cold | |
Pressure | |
Heat |
The Yield Strength Of Austenite (Niti Alloy) Is______
100 Mpa | |
700 Mpa | |
240 Mpa | |
560 Mpa |
The Wetting Of An Adherent Surface By An Adhesive Is Related To______
Nature Of The Adherent That Is Crystalline Or Amorphous | |
Surface Energy Of The Adherent | |
Surface Texture Of The Adherent | |
Surface Tension Of The Adherent |
The Water Powder Ratio Of Alginate Is______
100 Ml Of Water To 60 Gms Of Powder | |
15 Ml Of Water To 40 Gms Of Powder | |
40 Ml Of Water To 15 Gms Of Powder | |
40 Ml Of Water To 40 Gms Of Powder |
The Type Of Spatula Used To Mix Composite Is______
None Of The Above | |
Stainless Steel | |
Iron | |
Plastic |
The Tow Cements Which Hold With The Tooth Are______
Znpo4 And Silicate | |
Gic And Polycarboxylate | |
Gic And Znpo4 | |
Gic And Silicate |
The Threshold Limit Value Of Mercury Exposures Is______
0.05 Mg / M3 | |
Mg / M3 | |
Mg / M3 | |
Mg / M3 |
The Term Trituration Means______
None Of The Above | |
Lysing Amalgam Alloy | |
Removal Of Excess Of Mercury | |
Mixing Of Amalgam Alloy And Mercury |
The Term Ordered Hardening Heat Treatment Used In Which Of The Following Dental Alloys ?
Silver-Palladium | |
Gold-Copper | |
Nickel-Chromium | |
Nickel-Titanium |
The Term Given To The Phenomenon Of Moisture Absorption By An Alginate Impression In______
Hysteresis | |
Gelation | |
Syneresis | |
Imbibition |
The Temperature (In °F) Of The Mixing Slab For Silicate Cements Should Be______
65 – 75 | |
85 – 95 | |
55 – 65 | |
75 – 85 |
The Tarnished Layer Of Silver Amalgam Consists Of______
Chlorides Of Tin | |
Sulphides Of Silver | |
Oxides Of Tin | |
All Of The Above |
The Strength Of The Gypsum Specimen When The Water In Excess Of That Required For The Hydrate Of The Hemihydrate Is Left In The Specimen Is Called______
Dry Strength | |
Green Strength | |
Compressive Strength | |
Water Strength |
The Strength Of Gypsum Prouducts Is Generally Expressed In Terms Of______
Green Strength | |
Compressive Strength | |
Wet Strength | |
Tensile Strength |
The Strength Of A Gypsum Investment Is Dependent On______
Gypsum | |
Carbon Content | |
Silica Content | |
Copper |
The Strain That Occurs When A Material Is Stressed To Its Proportional Limit Is______
Resilience | |
Toughness | |
Elastic Limit | |
Maximum Flexibility |
The Stiffness Of A Dental Gold Alloy Is Determined By Its______
Modulus Of Elasticity | |
Flow | |
Ultimate Tensile Strength | |
Proportional Limit |
The Standard Perforated Tray For Us With Alginate Impression Materials May Be Brought To More Customized Contour By______
Base Plate Wax | |
Utility Wax | |
Boxing Wax | |
Beading Wax |