The Polymerization Of Self-Curing Resin Takes Faster In______
The Polymerization Of Self-Curing Resin Takes Faster In______
Hot Water | |
Cold Water | |
Under Pressure | |
In Vaccum |
پاک اسٹڈی لائبریری اپنی خدمات کو بہتر کرنے کے لئے نئے سوفٹ وئیر انسٹال کررہی ہے ۔ اس لئے آئندہ کچھ دن آپ کو کچھ صفحات تک رسائی میں مشکلات کا سامنا ہوسکتا ہے ۔ جس کے لئے ہم معذرت خواہ ہیں۔
Pak Study Library is installing new software to improve its services. herefore, in the next few days, you may face difficulties in accessing some pages. sorry for the inconvenience.
The Polymerization Of Self-Curing Resin Takes Faster In______
Hot Water | |
Cold Water | |
Under Pressure | |
In Vaccum |
The Point At Which A Stress Of A Material Exhibits A Specific Limited Deviation P Is Called______
Tensile Strength | |
Proportional Limit | |
Ultimate Strength | |
Yield Strength |
The Plasticizers Used In Polyether Impression Material Is______
Polyether Polymer | |
Colloidal Silica | |
Glycol Ether | |
Di-Vinyl Poly (Dimethyl Siloxane) |
The Percentage Of Copper In High Copper Alloy Is______
0-6% | |
20-30% | |
10-12% | |
13-30% |
The Pattern For The Metallic Framework Of A Removable Partial Denture Is Fabricated From______
Modelling Wax | |
Inlay Wax Type-Ii | |
Boxing Wax | |
Casting Wax |
The Particle Size In Microfilled Composites Is______
0.05 To 0.04mm | |
0.3 To 0.4mm | |
0.01 To 0.1 Microns | |
0.5 To 1.0 Microns |
The Opacity In Ceramics Is Achieved By Adding______
Copper Oxide | |
Silica | |
Titanium Oxide | |
Boric Oxide |
The % Of Free Monomer In A Heat – Cured Acrylic Resin Is______
0.2% To 0.5% | |
0.6% To 0.8% | |
8% To 10% | |
3% To 5% |
The Most Toxic Form Of Mercury Is______
Mercury Sulphide | |
Inorganic Mercury Forms | |
Methyl And Ethyl Mercury | |
Mercury Vapour |
The Most Mucostatic Impression Material Is______
Thin Mix Of Plaster Of Paris | |
Free Flowing Wax | |
Zinc Oxide Eugenol Impression Paste | |
Reversible Hydrocolloids |
The Most Important Disadvantage Of Acrylic Denture Base Is______
Tooth Breakage | |
Porosity | |
Shrinkage | |
Water Absorption |
The Most Commonly Used Titanium Alloy For Dental And Medical Purposes Is______
Ti 6al 4v | |
Ti 5al 4v | |
Ti 5al 5v | |
Ti 6al 6v |
The Most Commonly Used, Most Biocompatible And Adhesive Cement Is______
Glass Ionomer | |
Zinc Phosphate | |
Calcium Hydroxide | |
Zinc Oxide Eugenol |
The Most Commonly Used Accelerator In Gypsum Product Is______
Potassium Sulfate | |
Sodium Fluoride | |
Aluminium Sulfate | |
Potassium Fluoride |
The Most Common Coupling Agents Are Organic Silicon Compound Called______
Chelane | |
Silane | |
Ligane | |
Parabane |
The Modulus Of Elasticity Is Defined As______
The Stress/Strain Ratio Within The Proportional Limit | |
None Of The Above | |
The Stress At The Proportional Limit | |
The Strain At The Proportional Limit |
The Melting Point Of Titanium Is ______ Degree Celsius?
1056 | |
1560 | |
1668 | |
1886 |
The Melting Point Of Silver Is______
1063° Centigrade | |
1123° Centrigrade | |
850° Centrigrade | |
960° Centigrade |
The Maximum Shrinkage During Firing Proces In Ceramic Occurs In______
Low Bisque Stage | |
Medium Bisque Stage | |
High Bisque Stage | |
Fusion Stage |
The Maximum Carbon Content Of Steel Used In Dentistry Is______
1.70% | |
2% | |
4% | |
19% |
The Material Used In Its Pure Form In Dentistry Is______
Composite | |
Amalgam | |
Silver | |
Gold |
The Malleting Force Is Directed______
Perpendicular To The Walls | |
45° To The Wall | |
Parallel To Long Axis Of Crown | |
None Of The Above |
The Major Component Of Zinc Phosphate Cement Is______
Zinc Oxide | |
Zinc | |
None Of The Above | |
Phosphoric Acid |
The Main Purpose Of Adding Metallic Oxides In Ceramic Is______
Opacity | |
Colour Matching | |
Transparency | |
None Of The Above |
The Main Ingredient Of Inlay Wax Is______
Carnauba Wax | |
Candellila Wax | |
Gum Dammar | |
Paraffin Wax |