Alginates Are______
Alginates Are______
Hydrocolloid | |
Sol | |
Colloid | |
Gel |
پاک اسٹڈی لائبریری اپنی خدمات کو بہتر کرنے کے لئے نئے سوفٹ وئیر انسٹال کررہی ہے ۔ اس لئے آئندہ کچھ دن آپ کو کچھ صفحات تک رسائی میں مشکلات کا سامنا ہوسکتا ہے ۔ جس کے لئے ہم معذرت خواہ ہیں۔
Pak Study Library is installing new software to improve its services. herefore, in the next few days, you may face difficulties in accessing some pages. sorry for the inconvenience.
Alginates Are______
Hydrocolloid | |
Sol | |
Colloid | |
Gel |
Alginates Are Made Dust Free By Adding______
Glyecrol | |
Glutamic Acid | |
Glycol | |
Alcohol |
Alginate Impression Material Is______
Non-Elastic Impression Material | |
More Mucostatic Than Zoe | |
Less Mucostatic Than Zoe | |
Thermoplastic Impression Material |
Alginate Impression Material Is Similar To Agar-Agar Impression Material In The Following Respect______
Both Can Be Re-Used For Fresh Impressions | |
Gelation Increase In Both On Increase In Temperature | |
Deformation During Removal Of Impression Occurs Due To Distortion Of Gel Fibers | |
Mixing Time Is Increased To Reduce The Setting Time |
Air Bubbles Formed On The Surface Of Casting Is Probably Due To______
Improper Angulation Of Sprue | |
Improper Heating Of The Investment | |
Improper Casting Pressure | |
Improper Wetting Of The Wax Pattern By The Investment |
Age Hardening Is A Process Done At______
Heating At 700°C For 1 Hour And Quenching In Water | |
Heating At 700°C For 10 – 15 Min And Quenching In Water | |
Heating Up To 200 – 450°C For 15 – 30 Min And Quenching In Water | |
Heating Above 700°C For 30 Min And Quenching In Water |
Agar Syringe Material Can Be Used With/As______
Agar | |
Primary Impression | |
Both Of The Above | |
Alginate Impression Material |
Agar Is Prepared From______
Chemicals | |
Bullock Heart | |
Sea Weed | |
Chick Cells |
Agar Impression Materials Differ From Alginate Impression Materials In That The Former Sets By______
Mechanical Action Of Saliva | |
Chemical Change | |
Evolution | |
Physical Change |
Ag-Cu Eutectic Alloy Has A Characteristic Property Of That Fusion Temp Of______
The Resultant Alloy Is Greater | |
The Resultant Alloy Varies According To The Content Of Ag Of Cu | |
None Of The Above | |
The Resultant Alloy Is Lesser |
Advantage Of Zinc Phosphate Over Gic Is______
High Modulus Of Elasticity | |
High Compressive Strength | |
Tensile Strength | |
Diametral Strength |
Advantage Of Zinc Containing Amalgam Is______
Dimensional Stability | |
Toxicity To Pulp And Dentin | |
Better Handling Property | |
Resistance To Creep |
Advantage Of Titanium Over Other Base Metal Alloys______
Low Melting Point | |
Low Strength | |
Low Weight | |
Low Cost |
Advantage Of Minimum Mercury Technique Or Eames Technique Is All Except______
Needs No Squeezing Of Excess Mercury | |
Sets Quickly | |
Greater Plasticity And Adapts Well To Cavity Walls | |
High Strength |
Admixed High Copper Alloy Powder Contains______
13-20% Copper | |
9-20% Copper | |
9-30% Copper | |
13-30% Copper |
Adequate Mixing Of Mercury Is Indicated By______
Shiny Mix | |
Dry Mix | |
Short Mixing Time | |
None Of The Above |
Addition Of Large Amounts Of Platinum To A Casting Gold Alloy Will______
Redden The Alloy | |
Increase Its Fusion Temperature | |
Decrease Its Tarnish Resistance | |
Decrease Its Strength And Ability To Be Hardened |
Ada Specification Number Of Gypsum Products Are Described Under______
12 | |
25 | |
1 | |
4 |
Acrylic Resins Were First Introduced As A Denture Base Material In______
1956 | |
1937 | |
1925 | |
1951 |
Acrylic Resins Are Used For______
Denture Base | |
Temporary Bridges | |
All Of The Above | |
Anterior Restorations |
Acrylic (Cold Cure)______
Produces Heat During Polymerization | |
Melts At 100°C | |
Still Requires Heat For Polymerization | |
Softens At 100°C |
Acid-Etching Is Done For______
120 Seconds | |
30 Seconds | |
90 Seconds | |
60 Seconds |
According Of Ada Specification No Or Number 1, The Minimum Compressive Strength For Silver Amalgam Filling Aftr One Hour Should Be______
80 Mpa | |
510 Mpa | |
140 Mpa | |
260 Mpa |
Accelerators And Retarders Are Used With Gypsum Products Mainly To Control______
Setting Time | |
None Of The Above | |
Setting Expansion | |
Hardness Of The Set Product |
Absorption Of Mercury In The Human Body Occurs Least From______
Skin | |
Lungs | |
Kidneys | |
Gastro-Intestinal Track |