Strain Is Defined As______
Strain Is Defined As______
A Deformation Resulting From An Applied Load | |
An External Force Opposing An Applied Load | |
An Applied Load Or Force | |
An Internal Force Opposing An Applied Load |
پاک اسٹڈی لائبریری اپنی خدمات کو بہتر کرنے کے لئے نئے سوفٹ وئیر انسٹال کررہی ہے ۔ اس لئے آئندہ کچھ دن آپ کو کچھ صفحات تک رسائی میں مشکلات کا سامنا ہوسکتا ہے ۔ جس کے لئے ہم معذرت خواہ ہیں۔
Pak Study Library is installing new software to improve its services. herefore, in the next few days, you may face difficulties in accessing some pages. sorry for the inconvenience.
Strain Is Defined As______
A Deformation Resulting From An Applied Load | |
An External Force Opposing An Applied Load | |
An Applied Load Or Force | |
An Internal Force Opposing An Applied Load |
Stainless Steel Orthodontic Wire Can Be Hardened By______
Age Hardening | |
Tempering | |
Work Hardening | |
Precipitation Hardening |
Stainless Steel Is Used Mostly In Dentistry______
To Replace Internal Gold Restorations | |
In Orthodontic Wires | |
To Construct Clasps For Partial Dentures | |
To Strength Amalgam |
Stages Of Annealing In Order______
Melting Point, Grain Growth, Recrystallization | |
Recrystallization Recovery, Grain Growth | |
Grain Growth Recrystallization Recovery | |
Recovery Recrystallization Grain Growth |
Stage Recognized In The Firing Of Dental Porcelain Given Below. Which Of State Is Not Correct ?
Low Bisque | |
Cold Stage Bisque | |
Medium Bisque | |
High Bisque |
Stabilization Of Stainless Steel Is Achieved By Adding______
Chromium | |
Nickel | |
Titanium | |
Carbon |
Space Lattice Refers To______
Inter Atomic Movement | |
Arrangement Of Atoms | |
Inter Atomic Imbalance | |
Arrangement Of Molecules |
Solder And Flux Used For Joining Elgiloy Wires Are______
Silver Solder And Fluoride Flux | |
Silver Solder And Borax Flux | |
Gold Solder And Fluoride Flux | |
Gold Solder And Borax Flux |
Sol – Gel Transformation Is Seen In______
Impression Compound | |
Impression Plaster | |
Hydrocolloids | |
Elastomer |
Softening Heat Treatment Of Alloy Increases______
Ductility | |
Proportional Limit | |
Tensile Strength | |
Hardness |
Silver Plated Dyes Use An Electrolytic Bath Of______
Silver Cyanide | |
Silver Fluorides | |
Silver Iodide | |
Silver Bromide |
Silicate Cement Is Indicated In______
None Of The Above | |
In The Restoration Of Posterior Tooth | |
Mouth Breathers | |
Patients With High Caries Index |
Silica Sol______
Is Applied To The Walls Of The Investment To Produce Hygroscopic Expansion | |
Acts As A Refractory In The Silica Bonded Investments | |
Increase The Strength And The Setting Expansion Of The Phosphate-Bonded Investment | |
Acts As A Retarder In The Silica Bonded Investments |
Shape Memory Is Seen In______
Nittinol Wire | |
Stainless Steel Wire | |
Aluminium | |
Tma Wire |
Shape Memory In Niti Is Because Of Stress Induced Form______
Ferrite To Austenite | |
Martensite To Austenite | |
Austenite To Martensite | |
Austenite To Ferrite |
Setting Time Of Zoe Is Best Controlled By______
Altering Ratio Of Two Pastes | |
Adding A Drop Of Water | |
Adding A Drop Of Eugenol | |
Cooling The Glass Slab |
Setting Time Of Amalgam Is Best Controlled By ______
Using Spherical Particles | |
Trituration Time | |
Altering Hg-Alloy Ratio | |
Lathe Cut Alloy |
Setting Of Pop Is Result Of______
Reaction Between Hemihydrate And Hihydrate | |
Reaction Between Caso4+ 2h2o And Water | |
Difference In Solubility Of Caso4 ½ H2o + Caso4+ 2h2o | |
Nucleation And Growth Of Caso4 ½ H2o Crystals |
Setting Expansion Is Advantageous In______
Dies | |
Investment | |
Models | |
Casts |
Secondary Caries Is Least Likely Seen With______
Gic | |
Polycarboxylate | |
Zinc Phosphate | |
Silicate Cement |
Rubber Base Impressions Are Poured Immediately As They______
Show Gelation | |
Become Elastic | |
Show Imbibition And Syneresis | |
Continue To Polymerize |
Rough Surface Of Elastomeric Impression Results From______
Air Bubbles | |
Incomplete Polymerization Caused By Premature Removal From Mouth | |
Too Rapid Polymerization | |
Inadequate Mixing |
Rough And Irregular Surface Produced On The Impression Is Because Of______
Air Incorporated During Mixing | |
Due To Improper Ratio Of Polymer And Monomer | |
Improper Application Of Pressure During Impression Making | |
Presence Of Excessive Saliva In Impression Area |
Rough And Irregular Surface Produced On The Impression Is Because Of ?
Too Rapid Polymerization | |
Presence Of Moisture In Impression Area | |
Improper Application Of Pressure During Impression Making | |
Air Incorporated During Mixing |
Rinsing Of The Impression Is Important To______
Remove Excess Impression Material | |
Accelerate The Setting | |
Hydrate The Impression | |
Remove Saliva |